Difference between Simple Fabric Inspection Machine and Table-type Inspection MachineST-TIMST-SFIMFabric type and widthhometextilewidth≤1.8mfabric without elasticity and curled edgefabric width≥1.8m Feeding positionwithout cloth guiderwith cloth guiderLightingbottom lighttop and bottom lightsInspection screentable type30 degree fixed angle screen

The Suntech ST-LTM Batcher Winder working speed can be synchronized with the weaving machine automatically to reduce tension. The sensor on ST-LTM can automatically collect the weaving machine's speed, and the ST-LTM will synchronize its working speed automatically to the detected weaving machine's speed. Once the working speed of the weaving machine changes, the ST-LTM's speed will also change a...

Fabric Inspection Machine:1. Mechanical Tension Control:- 60 degree fixed angle inspection screen, which has been verified thousand times to prove to be the most suitable angle for knitted fabric. It has the least influence for fabric tension.2. Electrical Tension Control:- The dancing roller will move up and down to control the fabric tension. It make sure the speed of fabric feeding, checking, r...

Suntech Fabric End Cutter is optional for Fabric Rolling Machine, the cutting length is vary.Our Fabric End Cutter is semi-automatic, safer than fully automatic. Video: https://..........com/watch?v=9lj0t6t_U6E

Usually we add this function onto the inspection machine,not packing machine. We have faults recording system to record the general information and the faults/defects information, so we can install this system to work with printer, then can print out two types self-adhesive lable.1.One type is general information like date, order No.,batch no.,operator's name,color etc.2.Another type is faults/def...

Suntech ST-DFSM Automatic Tube-Sewing Machine is used for sewing open width knitted fabric into tubular fabric for dyeing purpose.As there's curled edges on knitted fabrics, the curled edges need to be opened so the sewing can be aligned well.To achieve curled edge control on Suntech ST-DFSM Automatic Tube-Sewing Machine, there are strict curled edge control system on the machine:1) 01 set of scro...

The whole process of winding the fabric on the machine is around 3.5m, and it is just around1.5m below the inspection screen, which can not be inspected. For inspecting every roll, we recommend to add a fabric end stop sensor at feeding posion, when it detects there is no coming fabric, the machine will stop automatically to let the operater join the next roll. In this way, there will be no fabric...

Suntech has three types Fabric Sample Cutting Machines, Manual type, Motorized type and Automatic type. For different machines, the free spare part is different.For Manual type Fabric Sample Cutting Machine, the free spare parts include one piece working wrench, two pieces cutting mats.For Motorized type Fabric Sample Cutting Machine, the free spare parts are one piece working wrench, two pieces c...

ST-TFIM Tubular Fabric Inspection Machine is specially and efficiently inspect the both sides of tubular fabric in single pass operation.When customer bought our ST-TFIM, we will give provide three different sizes of light boxes, why do we give light boxes for this machine?We will provide three different sizes of light boxes according to customers' requirements for various fabric,but the range is ...

Customer can choose normal packing line solution (without vacuum packing effect) or vacuum packing line solution as per requirements when considering Suntech Fabric Roll Packing Machine ST-ARPM,. Regarding the suitable packing film, for: --Normal packing line solution (without vacuum packing effect) Customer should choose the PE film with thickness 60-80 micron; ...

1.Blade is made from Japanese imported alloy steel with hardness HRC63-65.2.24 monthes warranty for whole machine.3.Free spares of two cutting mat, one working wrench,one pot of oil(for motorized one).4.One blade can be used 200000 times.Suntech has three kinds of Fabric Sample Cutting Machine.one is Hand type Fabric Sample Cutter.one is Motorized Fabric Cutting Machinethe other is Fully Automatic...

Some customers maybe have such problem: Why the fabric selvadge is not aligned well when fabric inspection machine rewinding?Here is the answer.1) Cloth Guider:Adjust the pair of cloth guider to the optimal working condition, which could keep fabric in the center.2) Edge-alignment Photo SensorOpen the Edge-alignment Photo Sensor, which could detect fabric selvedge and allow the Rewinding Station m...

ST-BS Beam Stacker is the best solution for storage of warp beam/size beam/weaving beam/fabric roll,which is widely applicable in the weaving preparation workshop,weaving unit and finishing unit for space utilization and to avoid damage of ready warp/fabric roll.How to maintain Beam Stacker?1.The base of motor must be horizontal.2.Align keyway during installation.3.During bolt fastening process,pl...

Generally Suntech Machines are very easy to install. But when customer needs, Suntech can provide the machine installation service by sending engineer overseas.And in this case, customer needs to pay the round-trip air ticket, hotel, food, local transportation and engineer's pocket money(USD50/day*days cost for travelling).

When purchasing fabric edge cutting machine, it is very important to choose correct cutting blade based on the fabric types.Generally, there're 4 types of cutting blade and each of them is suitable for different kind of fabrics:1) Cold cutting blade is suitable for non-elastic fabrics without burrs;2) Heat cutting blade is suitable for non-elastic fabrics with burrs;3) Ultrasonic cutting blade is ...

Many textile factories require the higher quality fabric to build their own brand. Therefore, the demands of Fabric Inspection Machine is increasing.Suntech Fabric Inspection Machines are installed all around the world. It is used to inspect fabric defects. As well, Suntech could provide Defect Inspection System, also named 4-points system to record the defects, shifts, batchs... The printer could...

ST-DFSM Automatic Tube-sewing Mchine allows the automatization of selvedge sewing operation of knit fabrics for dying.How to make sure edge-alignment performance?1.Check the centering roller at the feeding place.Its function is avioding fabric deviation,2.Adjust the triangle frame to make the fabric at center position.3.Adjust the edge-alignment raster on the limited bar and install on a correct p...

All the Suntech machines which are with rolling or inspection functions have the Suntech digital counter meter for counting the fabric length.Suntech digital counter meter can measure fabric length in yards or meters as per needed. Not only the length counting function, Suntech digital counter meter also have the length pre-setting function. That the operator can pre-set the needed fabric length t...

ST-DFLM / ST-DFRM1) Cloth Guider:Adjust the pair of cloth guider to the optimal working condition, which could keep fabric in the center.2) Folding Triangle FrameAdjust Folding Triangle Frame as per actual situation.3) Fabric-limit BarAfter folding on the Folding Triangle Frame, the folded fabric should go through the fabric-limit bar and operator should align the two edges by hand at this part.4)...

Beam Stacker (ST-BS) is the best solution for storage of warp beam/ size beam/ fabric roll, which is widely applicable in the weaving preparation workshop, weaving unit and finishing unit for space utilization and to avoid damage of ready/ fabric roll. They are available in different models for handling each particular situlation. For example, loading and unloading can be undertake from one postio...

Our beam stacker can hold 100pcs beams.According to our experience, we usedstandard lanyards will not leave marks on the beam teeth, we have sold more than 300 sets of axes library using our standard landyards.Also, we can add plastic protextion sleeve on the lanyards.

For sewing, it is single-thread sewing on our fabric folding sewing machine. We purchased the JUKI Sewing Machine(Model DDL-8700) and modified on its base. The original sewing machine cannot work well in this application. Once the dyeing is finished, the operator just needs to pull the thread and the tubular fabric will come into open width again easily.

Three sets of Scroll Roller and One set of Air-blowing device to control fabric curled edges through Fabric Inspection Machine1 Before inspection table, the scroll roller will make fabric open totally when inspection.2 After inspection, the scroll roller will open fabric curled edges again to make sure an accurate edge-align.3 Before rewinding, the scroll roller& Air-blowing device will once more ...

Suntech Tubular Fabric Inspection Machine (ST-TFIM) is specially designed for easily and efficiently inspect the both sides of tubular fabric in single pass operation. The fabric is loaded and pass to the fabric checking light box, through two mirrors, the operator can easily check both sides of fabric. This machine can be supplied to operate fabrics from roll to roll or plait, or with various oth...

ST-ARPM Automatic Fabric Roll Packing Machine is used to pack fabric rolls for normal and vaccum effect with PE film.How to make sure the PE film will not stick on sealing machine?1.Please use the right packing material with good quality.The ideal PE film is in thickness of 60-80 microns.2.Please set the correct temperature for the width sealing cutter&side sealing cutter.Normally it is around 125...

We have four kinds of machines for transporting the big fabric roll :ST-HBT-01 Hydraulic Big Fabric Roll Transport TrolleyST-MBT-01 Motorized Big Fabric Roll Transport TrolleyST-HBT-08 Hydraulic Batch TrolleyST-MBT-08 Motorized Big Batch Transport TrolleyThe Advantage of ST-HBT-01 and ST-MBT-01:the bucket of ST-MBT-08 should incline and then the big batch will fall down to the ground.It is not pl...

The working principle of Fabric GSM Cutter is cutted by pressure. There is a long handle for operator to cut the fabric easily. Regarding the cutting blade, there is no need to replace the balde, generally speaking, one cutting blade could be used 4-5 years. What's more, the blade installation is very complicated.If the blade is not installed very well,it will influence the accurate size of fabri...

When there is no fabric roll inlet conveyor, operator would send the fabric roll to main packing unit by hand. Two conditions will be the cause.1 When the first fabric roll is not completed sealing, the operator may put on the next , and the photo-sensor may not detect the width and diameter of the second roll.2 Since the fabric roll is put by hand, it might be deflected, and the photo-sensor may ...

Fabric Sample Cutting MachineFabric Sample Cutting Machine is used to cut fabric samples with attractive zig-zag edges.Following are advantages of this machine:*Imported Japanese durable alloy steel zig-zag serrated blade*Cutting times 200000*Warranty term:24 months for whole machine*The same technology as Polytex*Free spare parts,one oil bottle,two cutting mat and one wrench

Fabric end cutter(Video) is usually installed on fabric inspection machine or fabric rolling machine for cutting the fabric widthwise.The guiding rail length of the fabric end cutter is normally larger than the fabric width. For example, total length 1.9m fabric end cutter is suitable for 1.7m fabric width.So, to purchase the fabric end cutter should put attention to the guiding rail length especi...

What is 4 Point System?4 point system is a software for recording the fabric faults, which is installed on fabric inspection machine.How to use the SUNTECH 4 Point System?First Step: Install the software into the computer and connected the computer with the machine(Usually if customer requires this system, we recommend them to buy the computer,software, printer together. We will install do the fir...

Suntech ST-ARPM Automatic Fabric Roll Packing Machine is used to pack fabric rolls for vaccum effect.The complete system is PLC controlled,full automatic.The fabric rolls are transported to the main packing for width and side sealing through a polythenen film.How to figure up the width of PE film needed?The width of PE film= fabric roll width + fabric roll diameter + 15cm

To ensure double guarantee for the beam loading, we recommend to use two piece of loading chain for each side .One is for loading the other is for safety ( This safety chains should be one or two cm longer than the loading chains.) But we need an Extra Charge,for the safety loading chain is 5.7USD/PC.Increase the safety lanyards is OK, incur additional costs, the average price of 5.7USD / PC.

For the maintainance of the battery of Motorized Warp Beam Trolley, we recommend to fully charge the battery (charge at least 12 hours per time ) before use our machine for the first time and repeat it at least 3 times for better performance and longer performance life, which has the same features as the maintainance of cell phones' battery. Besides, It can continuously work for 4 hours. And 5 to ...

Tubular fabric inspection machine is specially designed for easily and efficiently inspect the both sides of tubular fabric in single pass operation.1. Per more than thousand times of testing, the roll cradle without motor driven is most suitable unwinding way for this model.2. According to feedback from the old customers, roll cradle without motor driven almost have no influence on tension. So th...

Tubular fabric slitting machine is used to open/slitting tubular fabric in dyeing and finishing procession. There are two main types of tubular fabric slitting machine for choice, to meet different demand:ST-TFSM-01:It is mainly applicable after rope dyeing. It is used to slit and open roped fabric, and specially designed for continuous high speed operation in automatic mode.The machine material c...

Temperature Setting:1. press "set" button 2. press button "" to change the temperature (up or down). 3. Press "set" button. Following the above three steps, the temperature setting will be finished.Temperature Choose:Please setting the temperature as 145 centi degrees at the first time, then try to change the temperature a little up and down. The real temperature will be influenced by:1. size of p...

Both heat cutting and ultrasonic cutting has sealing cutting effect, suitable for fabric with burr.Ultrasonic Cutting: has better cutting effect, the cutting and sealing effect is more smoothly then effect of heat cutting.Heat Cutting:the cutting blade is electrical heating then cut the fabric, there will be a little smell.

If the Pendulem is not enough, can you supply more?I understand. Now the point is we always supply the machine with standard number of Pendulem.You know for different kinds of knitted fabric, the tension is different which will require different number of pendulum.So we can not supply exact number of pendulem for every customer but always standard number, because we do not see their fabric and do ...

1. 2pcs inspection mirrors to inspect both sides of tubular fabric conveniently in single pass operation.2. Magnetism fabric checking light box suspends against rewinding rollers to eliminate fabric crease3. Light Transmitter controls fabric checking box lighting wireless