Regarding this machine, we use Japanese imported alloy cutting blade,which is three times durable than normal cutting blade. And we have sold lots of this machine,all the feedbacks from our current customers are positive. So we are confident about our quality. If there is any questions occurred within warranty time, we will be fully responsible and send you free spares immediately. It just takes 3...

Normally, our standard ST-ASCM is fully automatic, it's much more convenient and easy to cooperate. But we also could do , the operator need to control the cutting mat by handle.

Normally the zig-zag pitch is 5mm, we also could do 3mm and 7mm

Generally, the free spare parts of ST-ASCM Automatic Fabric Sample Cutting Machine are 02pcs Cutting Mats, 01 pc Working Wrench, 01 pc Straight /Zig-zag Cutting Blade, 01 Oil Bottle. Please kindly note, the oil bottle is empty because of the shipping rule, the oil is prohibited.

According to the principle of PLC system, it's possible to cut 10*10mm.But in practice,10mm is so small that will lead to the fabric deviate its normal location,then it won't be so accurate to 10*10mm.According to our experience,the min swatch size 25mm is the best.

There are many different size fabric samples, so how to make fabric samples with Fabric Sample Cutting Machine?Suntech has three kinds of Fabric Sample Cutting Machine, one is Hand type Fabric Sample Cutter, one is Motorized Fabric Cutting Machinethe other is Fully Automatic Fabric Sample Making Machine.The cutting length, cutting size, cutting height, cutting effect are adjustable, different size...

SUNTECH ST-MSCM Motorized Fabric Sample Cutting Machine is used for cutting square fabric samples with zigzag or flat edges.And there is a laser around the cutting blade on ST-MSCM for better measurement to improve the cutting performance.

Suntech has three types Fabric Sample Cutting Machines, Manual type, Motorized type and Automatic type. For different machines, the free spare part is different.For Manual type Fabric Sample Cutting Machine, the free spare parts include one piece working wrench, two pieces cutting mats.For Motorized type Fabric Sample Cutting Machine, the free spare parts are one piece working wrench, two pieces c...

1.Blade is made from Japanese imported alloy steel with hardness HRC63-65.2.24 monthes warranty for whole machine.3.Free spares of two cutting mat, one working wrench,one pot of oil(for motorized one).4.One blade can be used 200000 times.Suntech has three kinds of Fabric Sample Cutting Machine.one is Hand type Fabric Sample Cutter.one is Motorized Fabric Cutting Machinethe other is Fully Automatic...

When purchasing fabric edge cutting machine, it is very important to choose correct cutting blade based on the fabric types.Generally, there're 4 types of cutting blade and each of them is suitable for different kind of fabrics:1) Cold cutting blade is suitable for non-elastic fabrics without burrs;2) Heat cutting blade is suitable for non-elastic fabrics with burrs;3) Ultrasonic cutting blade is ...

The working principle of Fabric GSM Cutter is cutted by pressure. There is a long handle for operator to cut the fabric easily. Regarding the cutting blade, there is no need to replace the balde, generally speaking, one cutting blade could be used 4-5 years. What's more, the blade installation is very complicated.If the blade is not installed very well,it will influence the accurate size of fabri...

Fabric Sample Cutting MachineFabric Sample Cutting Machine is used to cut fabric samples with attractive zig-zag edges.Following are advantages of this machine:*Imported Japanese durable alloy steel zig-zag serrated blade*Cutting times 200000*Warranty term:24 months for whole machine*The same technology as Polytex*Free spare parts,one oil bottle,two cutting mat and one wrench

Fabric end cutter(Video) is usually installed on fabric inspection machine or fabric rolling machine for cutting the fabric widthwise.The guiding rail length of the fabric end cutter is normally larger than the fabric width. For example, total length 1.9m fabric end cutter is suitable for 1.7m fabric width.So, to purchase the fabric end cutter should put attention to the guiding rail length especi...

Both heat cutting and ultrasonic cutting has sealing cutting effect, suitable for fabric with burr.Ultrasonic Cutting: has better cutting effect, the cutting and sealing effect is more smoothly then effect of heat cutting.Heat Cutting:the cutting blade is electrical heating then cut the fabric, there will be a little smell.

SUNTECH could supply replaceable cutting blade for Fabric Cutting Machine, also the zig-zag cutting blade and flat cutting blade.The installation is very easy also, pls don't worry about it.