1- Take off all the fabric from fabric folding machine.2- Check the cloth guiders, make sure the distance between two side clothe guiders to two side beams is same.3- Set the button of "sensitiveness adjusting" between 6 & 7.4- After finishing above three steps, loading the fabric on fabric folding machine, After fabric folded by triangle frame, the folded fabric will go through the edge-alignment...

The key factor of "crease" issue is the height of triangle frame. Adjust the triangle frame to a heigher position by adjusting the support rod on Fabric Folding Machine

Yes, we have upgraded the Fabric Folding Machine to be suitable for mesh net fabric.1.We add one Motor at the fabric feeding position, which could feed fabric automatically without stretching.2. Adding Electrical Tension Control, we will make sure the speed of fabric feeding, checking and rewinding are synchronized. The dancing roller is specially designed for tension control. The dancing roller w...

1. TAKE OFF ALL THE FABRIC FROM FOLDING MACHINE. 2. CHECK THE CLOTH GUIDERS, MAKE SURE THEY ARE SYMMETRICAL. 3. HOW TO SOLVE THE ‘’CREASE’’ ISSUE:THE KEY FACTOR OF ‘’CREASE’’ ISSUE IS THE HEIGHT OF TRIANGLE FRAME.AND PLEASE ADJUST THE TRIANGLE FRAME TO A HIGHER POSITION BY BELOW TWO PARTS: NOTE: PLEASE ADJUST THE TRIANGLE FRAME HEIGHT TO A HIGHER POSITION SIGHTLY, AND OPERATOR NEED TO ADJUST THE...

ST-DFLM / ST-DFRM1) Cloth Guider:Adjust the pair of cloth guider to the optimal working condition, which could keep fabric in the center.2) Folding Triangle FrameAdjust Folding Triangle Frame as per actual situation.3) Fabric-limit BarAfter folding on the Folding Triangle Frame, the folded fabric should go through the fabric-limit bar and operator should align the two edges by hand at this part.4)...