It is because there is no inlet conveyor, operator would send the fabric roll to main packing unit directly by hand. The fabric roll had not finished width sealing,when operator put another roll into packing machine, so the machine didn’t detect the coming fabric roll and fail packing.Besides, if the fabric roll is not feed straightly onto the conveyor which also disturbs the detection of the ...

After using the machine, please turn off the power and use the cotton cloth to wiping the sealing cutters when the cutter still have the heat. Also you can paint Teflon on the surface of the cutters. If it’s still not workable, we suggest you to buy a new cutter.

Yes, We can use PE-film thicker than 60-80 microns, (for example 120mm) but if so, we will need to specially customize the packing machine's sealing cutter, and the cutter will only be suitable for that thickness. Normally we would recommend customer to use the PE film in thickness 60-80 micros, because it is not only suitable for the our standard sealing cutter, but also its thickness is ...

The Lifter can be added after packing, it can rise the fabric roll to the exact height then push it to the stalliage for collection directly. The height can be customized by customers requirements, and its price will be vary.Fabric Roll Packing Machine: http://..........com/pid17183055/SUNTECH-Fabric-Roll-Packing-Machine.htm

First of all, I have to say it is fabric roll packing machine, it has no crease eliminate function. You need to make sure there is no crease on your fabric roll before packing. Then please kindly check below information one by one: 1) Please kindly check the PE film, whether it is correct and in good quality; thickness 60-80 Microns; 2 ) Please kindly check if the sealing cutter temperature is...

What is the appropriate sealing cutter temperature?Normally it is around 125-130℃,but it could be adjusted as per the actual situation.What is the appropriate heat chamber temperature?Normally it is around 180-200℃, but it could be adjusted as per the actual situation.

Polythene PE film, Thickness 60-80 Microns. Two different kinds of polythene film for the two packing proposals.1).Normal Packing Proposal: Normal PE film, thickness 60-80 microns, without heat shrinking function 2) Vacuum Packing Proposal: Heat-shrinking PE film, thickness 60-80 microns for vacuum packing. The heat-shrinking film should be able to continuously working ten seconds under 180-20...

It is because there is no inlet conveyor, operator would send the fabric roll to main packing unit directly by hand. The fabric roll had not finished width sealing,when operator put another roll into packing machine, so the machine didn’t detect the coming fabric roll and fail packing. Besides, if the fabric roll is not feed straightly onto the conveyor which also disturbs the detection of th...

The principle of cutting is “pressure”, not the “sharpness” of the cutter. We suggest you to adjust the position of sealing cutter by regulating all screws (in below red), to make sure the cutter is in the horizontal plane, so that the cutter is with uniform force.

We have teflon tape in random accessories,if the damage is not serious,you can make a simple repair with teflon tape.if serious,you need buy a new sealing cutter

1)Please make sure the the new silicone bar is used with new sealing cutter2)The principle of cutting is “pressure”, not the “sharpness” of the cutter. We suggest you to adjust the position of sealing cutter by regulating all screws (in below red), to make sure the cutter is in the horizontal plane, so that the cutter is with uniform force.

How to figure up the width of PE film needed according to the width?FABRIC WIDTH = ROLL WIDTH + ROLL DIAMETER + 15cm

The Automatic Fabric Roll Packing Machine is upgraded - with the function of smart classification.Operator can setup the assignations in PLC system.Fabric roll from inspection machine no.1 can be assigned to storage stage no.1 (or no.2 or no.3 or no.4).Fabric roll from inspection machine no.2 can be assigned to storage stage no.2 (or no.1 or no.3 or no.4).Fabric roll from inspection machine no.3 c...

ST-ARPM Automatic Fabric Roll Packing MachineAutomatic Fabric Roll Packing Machine is used to pack fabric rolls for vacuum effect.How can the machine pack fabric roll in order?The whole process is controlled by PLC and adjusted by photo-sensor.1.No auto storage conveyor: if the speed of packing can catch up with the speed of rolling,there is no need to add storage stage. Several Inlet Conveyor + P...

Normally sealing cutter temperature is around 125-130℃, but it could be adjusted as per the actual situation.